background image

SoundVision Technologies dba TRUAUDIO

PRODUCT WARRANTY

All in-wall, in-ceiling, outdoor speakers, volume controls and freestanding loudspeakers have a limited lifetime warranty.  This 

warranty includes lifetime parts and repair labor on all components.  Powered subwoofers and active electronics have a one (1) year 

limited warranty.  This warranty includes one (1) year parts and repair labor on all components.  TRUAUDIO’s obligation under these 

warrantees is limited to repairing or replacing any component found defective in material or workmanship under normal conditions of 

use.  These warrantees shall not apply to products which have been abused, modified, disassembled, or repaired by anyone other 

than TRUAUDIO or one of its appointed service centers.  Products to be repaired under this warranty must be returned to the factory 

or designated service center with all transportation and insurance charges pre-paid.

It is the policy of TRUAUDIO to continuously incorporate improvements into our products. All specifications are 

subject to change without notice.  If you have any questions regarding this or any other TRUAUDIO products, 

please call 1-888-858-1555, Monday – Friday, 7:00 am – 6:00 pm MST.

TRUAUDIO Speaker Systems, St. George, Utah, 84790

Office: 435.986.1574 Fax: 435.251.9815

S3125A

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

1) Read Follow and Keep these instructions
2) Heed all warnings.
3) Only connect this apparatus to a grounded outlet.
4) Ensure the main plug is undamaged, and fully functional as a disconnect device.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
rnanufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacernent of the obsolete outlet.

10) Protect the power cord frorn being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit frorn the apparatus.
11) Only use attachments/accessories specified by themanufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
rnoving the cart/apparatus combination to avoid
injury frorn tip-over.
13) Unplug this apparatus during lightning storrns or
when unused for long periods of tirne.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

This symbol is intended to alert the user to the

presence of important operation and maintenance

(servicing) instructions in the literature

accompanying the appliance.

This symbol is intended to alert the user to the

presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

• TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
• THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLED

WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.

Содержание AMP-3512

Страница 1: ...akers that will be connected to this unit can handle the output power of the amplifier We suggest NOT to use any kind of extension cord unless it is polarized and made from heavy gauge wire If at all possible plug this unit directly into the wall outlet or surge protection General Information and Features Front Panel Power Switch This is used to turn the unit on or off LED Indicators There is one ...

Страница 2: ...that might cause a short These amplifiers are stable down to 4 ohms The impedance with the connected speakers should not be lower than 4 ohms Bridged Connection The bridging mode is meant for a single speaker and high power application such as Home Theater In the bridged mode the speakers should be 8 ohm minimum Make sure the amplifier power is OFF before making connections Connect the right and l...

Страница 3: ...ug of the components with non polarized plugs 4 Test the AC receptacle using a ground tester 1 Check the setting on the SEN ADJ knob You may need to turn down controls 1 Check that the bridging switch is off If two adjacent channels are connected normally but the bridging switch is set to the bridged position the two speakers will be out of phase 2 The speakers may be wired out of phase Recheck po...

Страница 4: ...onotblockanyventilationopenings Installinaccordancewiththe rnanufacturer sinstructions 8 Donotinstallnearanyheatsourcessuchasradiators heatregisters stoves orotherapparatus includingamplifiers thatproduceheat 9 Donotdefeatthesafetypurposeofthepolarizedorgrounding typeplug A polarizedplughastwobladeswithonewiderthantheother Agrounding typeplughastwobladesandathirdgroundingprong Thewidebladeorthe th...

Отзывы: