5
CAUTION:
There are two sharp needles that puncture the coffee capsules. One is located in the top cover and the other is
in the bottom of the Coffee
Capsule Holder itself. To avoid risk of injury, do not put your fingers in or near the Coffee Capsule
Assembly Housing.
CAUTION:
There is extremely hot water in the Coffee
Capsule Holder during the brewing process. To avoid risk of injury, do
not press the Brew Chamber Release Button or open the top cover during the brewing process.
UNPACKING:
1. Carefully unpack the brewer and all parts. Remove any tape, labels or packaging materials.
2. Wash Water Tank Filter, Drip Tray, Drip Tray Cover, Coffee
Capsule Holder and Brew Basket with warm, soapy water. Rinse well and
dry thoroughly.
3. Wipe exterior surfaces of the product with a soft, moist cloth to remove dust particles collected during packing and handling. NEVER
IMMERSE THE BREWER, CORD OR PLUG IN WATER OR ANY OTHER LIQUID.
4. Place Brewer on a solid, level, heat-resistant surface.
PREPARING FOR USE
CLEAN THE SYSTEM:
Before the first use, it is recommended to run a 14 Oz cycle of water through the Coffee Brewer.
1. Place the Water Tank Filter in the Water Tank.
2. Fill the Water Tank to the MAX level and close the lid.
3. Place the Brew Basket in place. DO NOT USE COFFEE GROUNDS.
4. Close the top cover on the Coffee Brewer.
5. Place a large on the Drip Tray and beneath the Brew Spout.
6. Plug the Coffee Brewer into an electrical outlet. Ideally, the Coffee Brewer should be operated on its own circuit, separate from other
appliances.
7. Push the Ground Coffee Brew Button.
8. The Coffee Brewer will heat and then dispense the water.
9. After a preset time, the Coffee Brewer will shut off and is now ready for use.
