Tru-Turf MT5000, Руководство пользователя

Страница: 8 / 17

TRU-TURF TRU-TURF MT5000 Series Manual 6
Operation Procedure
Step 1:
Connect Trailer to Prime Mover, leave connected at all
times, when using.
Step 2:
To Load Mower onto Tote, release Upper Frame Locking
Catch; (MT115) raise the Upper Locking Frame (MT103
or MT135) to lower Mower Support Tray (MT104) to the
ground. Raise the pins in MT130 & MT131, roll the mower
onto the mower tray, ensuring that it is located between
and under the axle retainer brackets (MT130 and MT131).
Step 3:
Tilt mower handle forward until it rests on the handle
support bracket; (MT107 John Deere & Jake , MT106 Toro
or MT160 Baroness ). Use the correct clasp MT143 (John
Deere, Jake and Toro) or MT160 (Baroness) to hold mower
handle. Ratchet the strap tight. Drop safety pins in MT130
and MT131 to prevent mower from escaping from the tray
(MT104) in transit.
For John Deere mowers, drill two holes in bracket under
the handle and attach brackets (MT144). Use this bracket
to connect clasp (MT143) into.
For Baroness mower ensure ’U’ bracket under the handle
to lock securely into catch (MT139). Drop pins fi tted
to MT130 & MT131 behind the axle to prevent mower
moving backwards off the tote in transit.
Step 4:
Push down on upper frame at handle until it locks down
on top of the Drawbar (MT102).
Step 5:
Turn off the fuel tap. The mower is now ready to be
transported to it’s next location.
Step 6:
Unloading the Mower is the reverse procedure to loading.
Step 7:
Maximum recommended towing speed for MT5000 tote
is not to exceed 12 mph (20kph)
Step 8:
Allow a few seconds for the mower to be lowered to the
ground after releasing the catch (MT115). The mower is
lowered through strut MT113.
Operation