SHREDDING:
1. Plug the shredder into electrical outlet.
2. Slide the Main Power switch into the On position.
3. Press the Power On button and indicator will illuminate
white when ready.
MANUAL FEED:
To shred paper insert, up to 10 sheets straight into the
manual feed entry.
To shred credit cards, insert 1 card at a time into the
middle of the paper feed entry.
AUTO FEED:
1. Open the auto feed tray.
2. Insert up to 100 sheets of paper into the auto feed tray.
Once you insert papers into the auto feed tray, it will start
shredding each sheet automatically.
FORWARD/REVERSE BUTTONS:
1. To clear any jammed paper, press Reverse button and
carefully pull out paper.
2. Press Forward button to clear any jammed media.
Please Note:
• Only paper should be used in the auto feed tray. Credit
cards should be shred through the manual paper feed slot.
• Do not insert additional paper into the auto feed tray when
it is already in use.
• Staples must be at the top of the paper (furthest away from
the shredder opening).
• Do not insert folded paper as it may cause the unit to jam.
• While shredding in auto feed mode, you can occasionally
shred 2-3 sheets of paper through manual feed in front,
simultaneously.
For all safety purposes, turn off shredder when not in
use.
OVERHEAT:
This shredder is equipped with a temperature sensor device that
protects the motor from heat damage. If the device senses the motor is
too hot, it will automatically turn off the shredder and the red Overheat
indicator will illuminate. This is normal. If this happens, you shredder
will need approximately 60 minutes to cool. Once the Overhead
indicator is no longer illuminated, you can continue shredding as
normal.
CHECK BIN LEVEL:
The Bin Full indicator will illuminate when waste bin is full. Turn the
unit OFF by sliding to the Main Power to Off position. Remove the bin
and either dispose of the paper shreds or compress the shreds down.
Re-insert the bin into the housing. Slide the Main Power to On
position and press Power Button to resume normal operation.
INSERT BIN:
The Door Open indicator will illuminate and the unit will not power on
until the bin is properly inserted. Re-insert the bin into the housing.
Slide the power switch to Auto On to resume normal operation.
REDUCE PAPER:
If too much paper is inserted into either the manual feed or auto feed
the unit will automatically stop shredding. When this occurs, press the
Manual Reverse button to dislodge the jammed paper. Remove the
paper, recount the pages, and continue with no more than the
maximum stated capacity.
PAPER CLIPS AND STAPLES:
Although our shredders are safe to shred the occasional standard
staple, you should remove staples whenever possible to prolong the
life of the unit. For auto feeding any stapled papers, please put the
stapled side showing on top. Industrial or non-standard, large-size
staples MUST be removed. DO NOT shred paper clips at any time as
this will cause damage to the blades.
MAINTENANCE:
To keep your Tru Red™ Brand shredder running smoothly and
dispose of shreds quickly, use Tru Red™ Brand shredder lubricant
sheets (SKU 24330082) and Tru Red™ Brand shredder bags
(SKU 24329960). Apply lubricants after 30 minutes of shredding
or a minimum of twice per month.
Содержание TR-NMC100AFA
