![Tru-Jump STR-10FT Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/tru-jump/str-10ft/str-10ft_assembly-installation-care-maintenance-and-user-instructions_1173770015.webp)
TRAMPOLINE FRAME ASSEMBLY
11
Trampoline Frame Assembly
BEFORE YOU BEGIN:
Review all steps before assembly and read all precautions before using the trampoline.
At least two adults are required to assemble this trampoline. Protective gloves should be used during assembly
to avoid injuries during installation. Goggles should be worn to avoid injuries to the eyes.
Step 1 – Frame Assembly
Locate the following 20 pieces of steel tubing parts that are needed to assemble the trampoline frame:
4- Top Rail with Leg Sockets (# 3)
4 - Top Rails (# 4)
4- Leg Bases (# 5)
4- Vertical Leg Extensions (# 6A)
4- Vertical Leg Extensions with 3 holes (# 6B)
Lay out all the parts on dry flat surface as shown below.
Note:
All parts with the same number are interchangeable and have no “right” or “left” orientation.
Make sure that you have plenty of space and a clean dry area suitable for the assembly of this trampoline.
IT IS
ESSENTIAL THAT THE INTENDED SITE FOR THIS TRAMPOLINE IS COMPLETELY FLAT AND LEVEL.
If
the ground is uneven this could cause movement in the frame and could cause stress on the joined sections of
the frame that could damage the trampoline and/or can cause serious injury. Make sure the trampoline is
assembled where it is intended to be used. The trampoline should not be moved after assembly is completed.