TRAMPOLINE ENCLOSURE ASSEMBLY
19
Three adults are recommended for this step. Please ensure the assembled Flat Steels are held firmly
during assembly to avoid them flexing back and causing injury.
With two people firmly holding the ends of the assembled Flat Steel frame push inward to form a circle.
Connect the ends and secure with Bolt (# I), Cap Nut (# J), Allen Wrench (# O) and Wrench (# N) as
shown below. This should be done by the third person while the other two people are firmly holding the
ends of the tubes in place.
NOTE:
Once the enclosure top frame is assembled, make sure the connection points are covered by the
enclosure sleeve.
Diagram 8-3