Pet Stock Twin Operators Manual Aug 2020 v7.0
Page 55
© Tru Blu Dog Wash 2016
11.5 Cleaning
Put on suitable protective clothing, gloves, apron, and protective glasses.
Use the wash down key to turn the machine on, select the rinse option on the
rotary dial and wash the tub area of the dog wash using the dog washing gun,
rinse all the excess under the edge of blue floor and turn the gun off.
Lift the tilt floor and hold in place with the support rod attached under the floor.
Caution should be taken when raising the floor as there are pinch points
between the floor and the base of the unit. Ensure tool used (refer section 10).
Do not remove any filters yet. Using a small plastic scoop gather and remove
the excess hair that has collected under the tilt floor area and dispose into
rubbish bin. Do not flush this down any drains.
Using the
handle
lift and remove the stainless-steel filter in the middle of the
floor area, clean this of any hair or solids. Put this filter to one side.
Warning the stainless-steel filter can have sharp edges, “rigger” gloves
need to be worn to protect against injury. If required, you can wear rubber
gloves underneath the “rigger” gloves.
Rod attachment
