TRQ SS1232 Скачать руководство пользователя страница 4

Страница: 4 / 4

Figure 8: Side A (Front)

Figure 9: Side B (Rear)

10.

On the rear bracket, make sure you have a pair of 6mm Black Latches, 6mm x 30mm Hex Bolts, 6mm Bolt

Nuts, 6mm Flat Washers, and 6mm Lock Washers for each side. These will be used to tighten the bracket

in place to prevent it from moving about.

Figure 10: Rear Bracket locked into place with Latches.

11.

For the last step, ensure you have 10 5mm x 20mm Hex Bolts. These will be used to tighten the running

board to the brackets.

Figure 11: Finished Product from the Chassis point of view

Содержание SS1232

Страница 1: ...5 FOOT POUND PARTS LIST Qty Part Description Qty Part Description 1 Driver Left Running Board 6 8mm x 19mm Hex Bolts 1 Passenger Right Running Board 10 5mm x 20mm Hex Bolts 2 Front Mounting Bracket Ar...

Страница 2: ...y to the rear and ensure that the hex bolts are loose and not fully tightened Please make sure that you do not fully tighten the bolts until the last step Figure 2 Front Bracket Figure 3 Middle Bracke...

Страница 3: ...d rear brackets b Middle Bracket B This one is for the Passenger s Side and will require you to use the original bolts nut and screws that came with the vehicle If not then you will have to purchase t...

Страница 4: ...hers and 6mm Lock Washers for each side These will be used to tighten the bracket in place to prevent it from moving about Figure 10 Rear Bracket locked into place with Latches 11 For the last step en...