TP Screw (2.3x12mm)
1.5mm
Epoxy the pin hinges to the flap.
4
Pin hinge(24x24mm)
Flap
1mm
Make sure they are in
the right position while
installing.
Trailing
edge
Keep about 1mm width space between trailing edge
and flap.
Install the flap servo to the servo mount as illustration
below.
Epoxy the flaps to the wings as illustration.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
8
2
2
Rod (2.5x300mm)
TP Screw (2.3x12mm)
Servo tray(70x58x2mm)
Pin hinge(24X24mm)
4
Collar (2.5mm)
2
2
2
2
2
2
Screw (3x16mm)
Nut (3mm )
Clevis
Aluminum Washer (3x6mm )
Control horn
Apply instant type AB glue to the control horn and the slots in the
aileron, insert the control horn to the slots as illustration.
6
7
8
9
10
2
Accessory list for the coming installation steps.
Trim the canopy carefully along the shaded line.
Assemble the canopy to the fuselage with TP screws.
Drill holes to appropriate position in the cowling and assemble
the cowling to the fuselage with TP screws as illustration.
Fix the fuselage top cover to the fuselage with screws as
illustration.
Screw (3x35mm)
Washer (3x6mm)
5
TP Screw (3x10mm)
6
TP Screw (2.3x8mm)
40mm
40mm
AILERON
Adjustment of the aileron and flap,be sure they can work
perfectly.
AILERON
Flap
Flap
AILERON
50mm
50mm
Top view
RUDDER
Side View
Adjustment of the rudder, be sure it can work perfectly.
3mm
57
11
54
58
55
56
59
