3. Instruction Manual
3-1. Power Indicator：
(1)LED lamp lit up when power input
(2)LED lamp of TIMING lit up when power
input in the beginning. After signal input, LED
lamp of TIMING lit up every 7.2°.
figure (1)
(3)Signal Input: See figure(4)，select 1 pulse or
2 pulse mode to input signal according to
dip switch in figure (7)
* CW：
Clockwise
；CCW：
Counterclockwise
。
* 1P/2P switch ON, 2 pulse mode
* 1P/2P switch OFF, 1 pulse mode
figure (4)
3-2. Wiring Instruction：
(1)Voltage Supply：figure(2)
figure (2)
(4)Motor Holding Off(H.F)：figure (5)
figure (5)
(5)TIMING Output：See figure (6) indicates TIMING
signal output of an open collector.
figure (6)
figure (3)
(2) Motor Connect：See figure (3)，if Motor is 4
leads, connect A,/A,B,/B excluding CA,CB
