Troy-Bilt TB154, Руководство оператора, Страница: 9 / 40

9
Fig. 13
REMOVING AND REPLACING TINES
Cultivator tines are subject to wear and should be replaced if
any signs of damage are present. Tines should also be
removed and cleaned after each use.
To replace the cultivator's tines:
1. Remove the click pin found at the end of each tine shaft.
NOTE: Each tine assembly is stamped either "A" or "B" (Fig.
9). Note each tine's location on the shaft for easier
reassembly.
MAINTENANCE AND REPAIR INSTRUCTIONS
WARNING:
To prevent serious injury, never
perform maintenance or repairs with unit running.
Always service and repair a cool unit.
WARNING:
Avoid accidental starting. Stop
motor and disconnect extension cord prior to
performing any maintenance or repairs.
WARNING:
Cultivator tines are sharp. Always
wear leather gloves to protect your hands when
handling tines.
WARNING:
Do not wash cultivator with a hose.
Avoid getting water on motor and electrical
connections.