1
9
Illustrated
Parts List
To order replacement
parts, call
1-800-648-6776
or visit
www.troybilt.com
1.
731-2635
Snow Removal Tool Mount
2.
684-04057 Impeller Assembly, 12” Dia.
3.
710-0347
Hex Screw, 3/8-16, 1.75, Gr5
4.
710-0451
Bolt, Carriage, 5/16-18, .750 Gr1
5.
710-0604A
Screw, 5/16-18, 0.625
6.
710-0703
Screw, Carriage, 1/4-20, .750, Gr5
7.
712-04063
Nut, Flange Lock, 5/16-18, Nylon
8.
712-04064 Nut, Flange Lock, 1/4-20, Nylon
9.
712-04065 Nut, Flange Lock, 3/8-16, Nylon
10. 714-04040 Cotter Pin, Bow-tie
11. 725-0157 Cable, Tie, 3/16 x .05 x 7.4
12. 726-04012 Nut, Push-on, .25 Dia
13. 731-04705 Chute, Adapter 5” Dia
14. 732-0611 Spring, Extension, .38 OD x 3.6
15. 736-0174
Washer, Wave, .625 x .885 x .015
16. 736-0242 Washer, Bell, .340 x .872 x .060
17. 736-0463 Washer, Flat, .25 x .630 x .0515
18. 731-2643
Snow Removal Tool
19. 738-0143
Screw, Shoulder, .498 x .34, 3/8-16
20. 738-0281
Screw, Shoulder, .625 x .17, 3/8-16
21. 738-04124A Shear Pin, .25 x 1.50
22. 741-0245
Bearing, Hex Flange x .75 ID
23. 741-0309 Bearing, Ball, .75 ID x 1.85 OD
24. 756-0981B
Flat Pulley, Idler, 2.75 OD
25. 790-00075 Housing, Bearing, 1.85 ID
26. 790-00080A Bracket, Auger Idler w/ Brake
27. 918-04191
Gearbox Assembly, Auger, 24”
918-04192
Gearbox Assembly, Auger, 26”
28. 684-04077
Housing Assy Troy-Bilt, Auger 24”
684-04078
Housing Assy Troy-Bilt, Auger 26”
29. 684-04107
Spiral Assembly, LH
30. 684-04108
Spiral Assembly, RH
31. 731-04870*
Spacer, 1.25 OD x .75 ID x 1.00
32. 736-0188 Washer, Flat, .76 x 1.49 x .06
33. 741-0493A
Bushing, Flange, .80 ID x .91 OD
34. 790-00087A Bearing Housing
35. 790-00120 Shave Plate, 23.66 (24” auger)
790-00121
Shave Plate, 25.66 (26” auger)
36. 784-5580
Slide Shoe, Std.
37. 719-0319
Housing, Auger, RH Reduced
38. 719-0320
Housing, Auger, LH Reduced
39. 721-0327
Seal, Oil, .750 ID
40. 741-0662
Bearing, Flange, .75 x 1.0 x .59
41. 710-0642
Screw, Self-tapping, 1/4-20, 0.750
42. 711-04285
Axle, Auger, 24”
711-04284
Axle, Auger, 26”
43. 714-0161
Key, Hi-pro 3/16 x 5/8
44. 715-04021
Pin, Dowel, .25 OD x 1.2
45. 717-04126
Shaft, Worm .75 OD
46. 717-0528A
Gear, Worm 20T
47. 718-04071
Collar, Thrust
48. 721-0325
Plug, 1/4 x .437
49. 721-0327
Seal, Oil, .75 x 1 x .131
50. 736-0351
Washer, Flat, .760 ID x 1.5 OD
51. 736-3084
Washer, Flat, .51 x 1.12
52. 741-0663
Bearing, Flange, .75 x 1.0 x .925
53. 741-0661A
Bearing, Flange, .75 x 1.00 x .975
54. 746-04230
Clutch Cable, Auger, 47.23”
55. 629-0071
Extention Cord, 110V
56. 790-00091
Slide Shoe, Deluxe
57. 710-1260A
Screw, 5/16-18, 0.75
* One found between spirals on models with 24-inch auger housing.
* Two found between spirals on models with 26-inch auger housing.
This Operator’s Manual
may cover a range of
product specifications
for various models.
Characteristics and fea-
tures discussed and/or
illustrated in this manual
may not be applicable to
all models.
NOTE: Snow thrower features/components vary by model. NOT all parts listed above and pictured on the previous page are
standard equipment.
