Troxler Enhanced RoadReader Plus 3451, Руководство по эксплуатации и инструкции

Страница: 111 / 247

6–8
To determine the moisture offset, press
〈
KeyPad
〉
on the
Moisture
Offset Select screen (see Figure 6–4). The PDA prompts for the
percent moisture value, as measured by the gauge (see Figure 6–7).
Enter the average moisture value determined above and press
〈
Ok
〉
.
The PDA then prompts for the true percent moisture value. Enter
the true (laboratory) moisture determined above and press
〈
Ok
〉
.
The PDA determines the offset (k) value. If the k value is larger
than that which is typical, the PDA displays a warning message. If
the derived value is within parameters, the PDA requests a file name
for the offset as shown in Figure 6–6 on page 6–7. Enter a
descriptive name (up to 20 characters), and press
〈
Ok
〉
. The name
should be as descriptive as possible, to ensure that the offset value
can be easily identified. The PDA displays
Moisture offset
saved. Do you wish to activate this offset?
Press
〈
Yes
〉
to activate the offset, or
〈
No
〉
to exit without activating
the offset. The PDA returns to the
Moisture Offset Select
screen.
Figure 6–7. Input Moisture
Value from Gauge
Figure 6–8. Input True
Moisture