Trox Technik X-GRILLE modular, Руководство по установке, Страница: 16 / 18

Initial commissioning, maintenance and
cleaning
Initial commissioning
Before you start commissioning:
 Check that the grilles are correctly seated.

Remove protective film, if any.
 Ensure that all grilles are clean and free from
residues and foreign matter.

Ensure that the devices have been correctly
fixed and connected to the ducting.
For commissioning see also VDI 6022, part 1 – 'Hy-
giene requirements for ventilation and air-condi-
tioning systems and units'.
Volume flow rate balancing
When several grilles are connected to just one
volume flow controller, it may be necessary to bal-
ance the volume flow rates.
Fig. 11: Attachments -AG and -DG
Damper unit with opposed action blades, adjustable
Fig. 12: Attachments -AS
Damper unit with hit and miss damper, adjustable,
secured with a locking screw
Air pattern
Set the air control blades depending on the local
conditions:
Maintenance and cleaning
Please note:

The cleaning intervals given in the VDI 6022
standard apply.
 Clean surfaces with a damp cloth.

Use only common household cleaners, do not
use any aggressive cleaning agents.

Do not use cleaning agents that contain
chlorine.

Do not use equipment for removing stubborn
contamination, e.g. scrubbing sponges or
scouring cream, as it may damage the sur-
faces.
Initial commissioning, maintenance and cleaning
Air terminal devices X-GRILLE modular 16