Date : september-2021
Firmware V1.0.4t
Display:
The E ink
display is 2.9” (
128×296 pixels) and is activated after pushing the button.
Below a description of the Icons that are show in the top line of the display.
scanning a tag
Press the button briefly to put the reader in standby, it will optionally show the last code read (if
activated via the PC companion software. In Standby mode the display above is shown. Now press
the button and hold to start scanning. The display will indicate the antenna is active:
If a successful read is done the ID number will be shown on the display: