4
EN
tower fan TVE 29 T
Information about the device
Device description
The tower fan
TVE 29 T
is suitable for indoor air circulation.
The device comes with the following features:
•
3 speed levels
•
On-demand 60° oscillation
Device depiction
1
2
3
No.
Designation
1
Control panel
2
Fan body
3
Foot
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with a carry
handle.
Before
transporting the device, observe the following:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
After
transporting the device, observe the following:
•
Set up the device in an upright position after transport.
Storage
Before
storing the device, proceed as follows:
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
Assembly and start-up
Scope of delivery
•
1 x Device
TVE 29 T
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Mounting the foot
1. Connect the two parts of the foot (3) so that the pins
engage in the provided openings.
2. Screw the two parts of the foot (3) together.
