Trotec TVE 100, Руководство по эксплуатации, Страница: 7 / 12

EN 7 360° turbo fan TVE 100
No. Designation Meaning
8 Rotary switch Setting the fan stage
setting the number of hours of the
timer
9 Illumination
button
Switching illumination on or off
10 Swing LED Is illuminated when the vertical swing
function is activated
11 Mode button Selecting the operating mode:
Normal operation
Natural wind
Night mode
12 On/off button Switching the device on or off
13 Oscillation button Switching horizontal oscillation on or
off
14 Oscillation LEDs The corresponding LED is illuminated
when oscillation has been selected
for the angles 30°, 90°, 180°
or 360°.
15 Swing button Switching the vertical swing function
on or off
16 On/off LED Illuminated when the device is
switched on
17 Mode LEDs Indicate the selected operating mode:
= natural wind
= night mode
18 Timer button Timer function: automatic switch-on
and switch-off
19 Display Indication of the fan stage and the
LED
Indication of the number of hours of
the activated timer (1 h to 12 h) and
the LED
h
20 Up button Increasing the fan speed
Increasing the number of hours of the
activated timer
21 Down button Decreasing the fan speed
Decreasing the number of hours of
the activated timer
Switching the device on
Once you have completely installed the device as described in
the chapter Assembly and start-up, you can switch it on.
1. Press the On/off button ( 12 ).
ð
The On/off LED ( 16 ) is illuminated.
ð An acoustic signal is emitted and the device starts up in
Normal operation mode.
Info
When the device is switched on, the display is
automatically dimmed after 1 minute.
Setting the operating mode
The device has the following operating modes:
• Normal operation
• Natural wind
• Night mode
Normal operation
Note
When normal operation is activated, there is no specific
LED to indicate the operating mode.
In normal operation mode the fan keeps running at the desired
fan stage. The fan stage can be set from 1 to 32 in this
operating mode and is indicated on the display (
19 ).
Please proceed as follows to set the fan stage in normal
operation mode:
1. Press the Mode button ( 11 ) until neither the LED nor
the LED ( 17 ) is illuminated.
ð
The device runs in normal operation mode.
ð
The LED is illuminated on the display ( 19 ).
2. Turn the rotary switch ( 8 ) clockwise to increase the fan
stage.
Turn the rotary switch (
8 ) counter-clockwise to reduce the
fan stage.
ð
The selected fan stage in shown on the display ( 19 ).
ð
The device keeps running at the set fan stage.