6
EN
axial fan TTV 4500 / TTV 4500 HP / TTV 7000
Assembly and start-up
Scope of delivery
•
1 x Device
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Mounting the foot
1. Attach the foot, the locking screws and the washers as
indicated in the figure:
Removing the condensate plug
The condensate plug, which is located at the lowest point of the
motor, must be removed before start-up. Store the condensate
plug safely as it must be reinserted for cleaning and
maintenance work.
1. Remove the condensate plug.
8
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Set the device up in an upright and stable position.
•
Make sure the device is only placed on firm, dry and
vibration-free ground.
•
When positioning the device, keep a sufficient distance to
heat sources.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that extension cables are completely unrolled.
•
Insert the mains plug into a properly secured mains
socket.
