EN
4
Operating manual – dehumidifier TTK 28 E
Information about the device
Description of the device
The device uses the principle of condensation to automatically
dehumidify rooms.
The fan sucks damp room air through the air inlet, the air filter,
the evaporator and to the condenser located behind it. The air is
cooled at the cold evaporator until it is below the dew point.
Water vapour contained in the room air precipitates on the
evaporator fins as condensation or rime. The dehumidified,
cooled air is slightly warmed at the condenser and blown out
again. The drier air thus conditioned mixes with the air in the
room. The humidity in the room where the device is positioned
is reduced as air constantly circulates through the device.
Depending on the air temperature and the relative humidity, the
condensed water either drops continuously or only during the
defrost phase through the integrated drain nozzle into the
condensation tank below. It is fitted with a float to measure the
filling level.
The device has a control panel for operating and controlling the
functions.
Once the maximum filling level of the condensation tank is
reached or in case the condensation tank is not installed
correctly, the condensation tank indicator light (see chapter
Operating elements) on the control panel is illuminated. The
device switches off. The condensation tank indicator light only
goes out again once the emptied condensation tank is
reinserted.
Optionally, the condensed water can be drained by attaching a
hose at the condensation connection.
The device can reduce the relative humidity of a room to approx.
40 %.
In addition, the device may also be used as a kind of clothes
dryer to dry wet laundry in living and working spaces.
Because of the heat radiation generated during operation, the
room temperature may rise slightly.
Device depiction
1
2
3
2
4
5
6
7
8
7
60%
50%
40%
PULL
60%
50%
40%
PULL
4
4
9
10
11
Содержание TTK 28 E
Страница 1: ...TRT BA TTK28E TC 001 EN TTK 28 E EN OPERATING MANUAL DEHUMIDIFIER...
Страница 19: ......