3
EN
Operating manual – infrared heating panel TIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S
•
The electrical connection must correspond to the
specifications in chapter Technical data.
•
Insert the mains plug into a properly secured mains
socket.
•
Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
Defective power cables pose a serious health risk.
•
Observe the storage and operating conditions (see chapter
Technical data).
•
Never drill into the heating panel.
•
Ensure a minimum distance of 50 cm to combustible
substances. Do not use the device in rooms where fuel,
solvents, varnishes or other easily inflammable vapours
are stored.
•
Do not transport the device during operation.
•
Allow the device to cool down before transport and / or
maintenance work.
Intended use
Only use the device for heating surfaces indoors.
Intended use comprises:
•
Heating surfaces
– in living spaces,
– in storage facilities,
– in salesrooms,
– in construction areas,
– in containers.
Improper use
•
Do not use the device outdoors.
•
Do not place the device on wet or flooded ground.
•
Do not place any objects, e.g. clothing, on the device.
•
The device may not be used for heating vehicles.
•
The device may not be used as a heating device for
babies / children or animals.
•
The device may not be installed inside a shower or directly
above a bathtub.
•
The device may not be used near swimming pools.
•
The device may not be used in the immediate vicinity of
sinks, bathtubs or other water containers.
•
The device may not be exposed to moisture or weather
effects (rain, sunlight).
•
Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
•
be aware of the dangers that occur when working with
electric devices in damp areas.
•
have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of hot surface
The surface of the device warms up during operation.
Do not touch the device surface during operation and
observe the minimum distance!
