Trotec TFC 220 E, Руководство по эксплуатации

Страница: 9 / 14

EN 9 fan heater TFC 220 E
Automatic switch-off
ü
The device is switched on.
ü
The device heats in comfort mode , night mode or eco
mode .
1. Press the timer button (15).
2. Select the desired number of hours and minutes by use of
the increase value (16) or decrease value (17) arrow
button. The value range is between 1 minute and 24 hours.
ð
The number of hours and minutes flashes on the hours /
minutes indication (22).
3. Press the timer button (15).
ð
The desired time until automatic switch-off is saved.
ð
The timer indication (8) is displayed.
ð
The time left until switch-off is displayed in the hours /
minutes indication (22) and counted down.
ð
Once the set time has elapsed, the device will switch
over into standby mode.
Notes regarding automatic switch-off:
• Manually switching the device off disables the automatic
switch-off function.
• If you select 0 hours / minutes, the timer will be off.
Fan rundown function
In order to dissipate the accumulated heat, the fan keeps
running for approx. 15 seconds after the heater's switch-off and
then switches off automatically. The icon for the
fan rundown
function (21) will be indicated on the display during the fan's
rundown period.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
17
14
15
16
18
19
No. Designation Meaning
14 Temperature button For setting the desired room
temperature
15 Timer button Switching the timer function on
and off:
setting range of 1 min to 24 h
in increments of 1 min
16 Increase value button For setting the desired room
temperature (15 °C to 35 °C)
or the number of hours and
minutes for the timer (1 min to
24 h)
17 Decrease value button
18 MODE button For selecting the operating
mode:
Comfort mode
Night mode
Eco mode
Frost monitor function
19 Power button For switching the device on or
activating standby mode
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Switch the device off.
2. Hold onto the mains plug while pulling the power cable out
of the mains socket.
3. Allow the device to cool down sufficiently.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.