Trotec TAC M, Оригинальное руководство пользователя, Страница: 11 / 32

EN 11 high-performance air purifier TAC V+ II / TAC M II
Activating hygiene alarm
If the hygiene alarm is activated, hygiene maintenance is
recommended after 4,000 operating hours.
1. Press the following buttons in the main menu to activate
hygiene alarm:
ð
Configuration
ð
System settings
ð
Setup application
ð
Next
setup application
back
hygiene alarm on
2. Press the Hygiene alarm off button to select the following
settings one by one:
ð
Hygiene alarm off : Hygiene alarm is inactive.
ð
Hygiene alarm on : Hygiene alarm is active.
3. Press the Back button to return to the main menu.
Setting the timer
1. Press the Configuration button in the main menu.
2. Press the Configuration button again in the following
screen.
3. Select Timer in the settings.
ð
Timer appears on the display.
run on timer
off on
back
123 Min
4. Activate the timer by pressing the On button.
5. Adjust the setpoint for the treatment duration by pressing
the time button or by selecting the value using the arrow
buttons.
Setpoint run timer
back
123 Min
ð
The adaptation will be adopted without any further
confirmation.
ð
Once the device is switched on, the timer starts running
and will switch off the device after the set time has
been expired.
Setup weekly timer
Please proceed as follows to adjust the setup of the weekly
timer:
1. Press the Configuration button in the main menu.
ð Buttons for further system settings will be indicated on
the display.
System
configuration
system settings
oper.hours
Setup
weekly
timer
back
2. Press the Setup Weekly Timer button.
ð
The list for the switching times will be indicated on the
display.
Command Event List
delete edit back
MO
TU
WE
08
17
08 00
00
00 :
:
: HEPA
StdBy
HEPA
4
4
3. Select a switching time by means of the arrow buttons.
4. Press the
Delete , New or Edit buttons to adjust the settings
as required.
ð
Delete : Delete the selected switching time.
Confirmation of deletion
delete back
TU 17 : 00 StdBy
ð
New : Add a new switching time.
ð
Edit : Change the selected switching time.
Command Event
Monday
StandBy
12 12 :
Fan
confirm
cancel
5. Optional: Press the Fan button to select the fan stage for
the selected switching time.
ð
The Setpoint Fan speed screen will be indicated on the
display.
Setpoint Fan speed
back
1 2 3
4 5 6
max 1000 m /h
3