EN
7
high-performance air purifier TAC ECO II
Switching the device on
1. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
2. Set the
on/off switch
(9) to position
I
.
ð
The
on/off switch
(9) is illuminated.
ð
The device is switched on and runs at the set fan speed.
Setting the fan stage
Info
The indicator lights (10 and 11) are used to monitor the
condition of the pre-filter or H14 HEPA filter. The
respective indicator lights are illuminated once they
need to be replaced due to heavy soiling. Make sure
the filters are clean before switching the device on (see
"Maintenance intervals"). Checking the filters is most
accurate if the highest fan speed is selected. To check
the filters, switch the TAC ECO II to the
max.
setpoint
stage. Observe the indicator lights.
ü
The device must be switched on.
1. Turn the operating switch (12) clockwise to the respective
setting.
ð
The fan operates at the desired setting.
Fan stage Air volume
value in m³/h
Filter class*
Standard filter
1
600 m³/h
H14
2
800 m³/h
H14
3
1000 m³/h
H14
4
1200 m³/h
H13
5
1400 m³/h*
H13
Max.
1650 m³/h
E12
* At an air volume flow of more than 1000 m³/h the filter class
of the H14 HEPA standard filter will be reduced. All values are
approximate and may vary by up to ± 10 % due to the condition
of the filters or due to production.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Press the
on/off
button (9) to switch the device off.
2. Remove the mains plug from the mains socket.
3. Clean the device according to the Maintenance chapter.
4. Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.
Designation
Article number
H14 HEPA filter
7.160.000.113
(G4) Z-line coarse prefilter 75 %
7.160.000.457
Prefilter fleece (black)
7.160.000.458
Protective fleece for the air outlet
7.160.000.459
Attachment hood for hose connection
6.100.007.061
FlowExtender (basalt grey)
6.100.007.066
FlowExtender (yellow)
6.100.007.068
FlowExtender (bronze)
6.100.007.069
FlowExtender (white)
6.100.007.070
Wall holder/tilt protection
6.100.007.073