Trotec PTNS 10-3,6V, Оригинальное руководство пользователя

Страница: 11 / 17

EN 10 Operating manual – cordless tacker PTNS 10-3,6V
Filling the magazine
Warning of electrical voltage
Before any work on the device, remove the mains plug
of the charger from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning
Make sure that the device is switched off.
Make sure not to hold the device by the trigger when a
staple or wire nail is jammed inside!
The trigger could be actuated by accident while
removing a jammed staple or wire nail.
Wear safety glasses
Wear appropriate eye protection when working with
the device.
Info
At the magazine filling level indicator you can check
whether any staples or wire nails are left in the
magazine.
Info
Do not open or close the magazine by force (e.g. for
filling).
ü
The device is switched off. The on/off switch (6) is set to
position
0 .
1. Turn the bottom of the device up.
2. Squeeze the magazine release (1) together and pull the
magazine slider (5) out towards the back.
1
5
3. Insert the staples (11) in the magazine (12) with their tips
pointing up.
11
12
4. Alternatively, that magazine (12) can also be filled with
wire nails (10). Observe the mark (13) on the left-hand side
of the magazine slider that indicates the guiding groove for
the wire nails. Insert the wire nails in the magazine with
their heads pointing downwards.
Note
Wire nails can only be inserted as depicted: on the left-
hand side of the magazine.
10
13
12