EN
14
Operating manual – cordless drill driver PSCS 10-12V
Switching the device on and off
The device has an infinitely variable speed control. The more
firmly you push the on / off switch (14), the higher is the speed.
1. Check whether the tool clamped in and the torque setting
selected are suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Press and hold the on / off switch (14) during screwing or
drilling.
ð
The device operates with the previously selected
settings.
ð
The LED work lamp (15) is illuminated.
14
15
4. Let go of the on / off switch (14) to stop the device.
ð
The LED work lamp (15) turns off.
Info
The motor has an integrated brake that quickly stops
the motor once you let go of the on / off switch (14).
Shutdown
1. Set the switch for clockwise / counter-clockwise rotation (5)
to centre position (lock).
2. If required, allow the device to cool down.
3. Remove the battery from the device (see Start-up chapter).
4. Remove the tool from the device (see Start-up chapter).
5. Clean the device according to the Maintenance chapter.
6. Store the device according to the Storage chapter.
Available accessories
Warning!
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
Accessories
Article number
Spare battery PSCS 10-12V
6.200.000.101
Screw bit set, 32-piece
6.200.001.001
Wood drill bit set, 15-piece
6.200.001.101
Metal drill bit set HSS, 15-piece 6.200.001.131
