Trotec PMTS 10-20V, Руководство по эксплуатации

Страница: 12 / 20

11 EN Operating manual – cordless multi-function tool PMTS 10-20V
2. Remove the tool from the tool holder (15), if any.
15
1
3. Insert the required tool in the tool holder (15).
The insertion tools can be installed in the tool holder (15) in
variable working directions.
15
4. Complete close the tool holder by means of the tool
release lever (1).
1
5. Check whether the tool is properly locked in place.
Info
The tools included in the scope of delivery are open-
end tools.
Customary closed-end tools may, however, be used.
Tool change with a closed end
If you use insertion tools with a ring-shaped end, the clamping
screw needs to be removed for tool change.
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Info
If need be, connect the dust extraction system before
the tool change.
1. Complete open the tool holder by means of the tool release
lever (1).
2. Remove the tool from the tool holder (15), if any.
15
1