background image

20

EN

170W multi-function tool PMTS 01-230V

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

Declaration of conformity

The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at 

https://hub.trotec.com/?id=43673

.

Declaration of conformity

in accordance with the EC Machinery Directive 2006/42/EC, 

Annex II, Part 1, Section A

Herewith, we – Trotec GmbH– declare that the machinery
designated below was developed, constructed and produced in
compliance with the requirements of the EC Machinery
Directive in the version 2006/42/EC.

Product model / Product:

PMTS 01-230V

Product type:

170W multi-function tool

Year of manufacture as of:

2019

Relevant EU directives:

2011/65/EU: 1 July 2011

2014/30/EU: 29 March 2014

Applied harmonised standards:

EN 60745-1:2009 + A11:2010

EN 60745-2-23:2013

EN 61000-3-2:2014

EN 61000-3-3:2013

Applied national standards and technical specifications:

AfPS GS 2014:01 PAK

EN 55014-1:2017

EN 55014-2:2015

EN 62321-1:2013

EN 62321-2:2014

EN 62321-3-1:2014

EN 62321-4:2014

EN 62321-5:2014

EN 62321-6:2015

EN 62321-7-1:2015

EN 62321-7-2:2017

EN 62321-8:2017

Manufacturer and name of the authorised representative of
the technical documentation:

Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: [email protected]

Place and date of issue:
Heinsberg, 

20.08.2019

Detlef von der Lieck, Managing Director

Содержание PMTS 01-230V






















Отзывы: