Trotec PBSS 10-600, Оригинальное руководство пользователя

Страница: 11 / 20

EN 10 belt sander PBSS 10-600
Adjusting the belt run
Note
Make sure that the abrasive belt does not grind into the
housing.
Regular check the belt run for its proper positioning
and, if necessary, adjust it by means of the adjusting
screw.
If the belt run is not centred after switch-on, the belt run may
have to be adjusted manually.
Use tools suitable for the intended task.
Proceed as follows:
1. Keep turning the adjusting screw (10) located at the front
roller until the abrasive belt (7) runs centrally.
7
10
ð If the belt run is still not centred after the adjustment, the
abrasive belt (7) needs to be replaced.
Assembling the dust collector
Warning of explosive substances
Wood dust inside the dust collector can self-ignite in
case of flying sparks. Do not use the dust extraction
system when grinding metals!
Wood dust can intermix with varnish residues or other
chemical substances.
Risk of fire and explosion!
Avoid overheating of the workpiece and the device.
Empty the dust collector or the vacuum cleaner's dust
collection bag at regular intervals.
Wear a protective mask
Wear an appropriate protective mask when working
with the device.
1. Push the dust collector (6) onto the adapter connection (4).
The dust collector (6) must click into place at the device.
6
4
Mounting the external dust extraction system
Alternatively, you can also connect the dust extraction system to
the device.
Warning of explosive substances
Wood dust inside the dust collector can self-ignite in
case of flying sparks. Do not use the dust extraction
system when grinding metals!
Wood dust can intermix with varnish residues or other
chemical substances.
Risk of fire and explosion!
Avoid overheating of the workpiece and the device.
Empty the dust collector or the vacuum cleaner's dust
collection bag at regular intervals.
Caution
Use a special vacuum cleaner to suck off harmful or
toxic materials.