18
EN
monobloc air conditioner without external unit PAC-W 2600 SH
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the air filter into the device.
Activities required after maintenance
If you want to continue using the device:
•
Leave the device to rest for at least 12 hours, so the
refrigerant can accumulate within the compressor. Wait
12 hours before switching the device back on! Acting
contrary might lead to compressor damage and a
malfunctioning device. Any warranty claims will be voided
in this case.
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Transport and storage
chapter.
Technical annex
Technical data
Model
PAC-W 2600 SH
Cooling capacity
2.6 kW
Heating capacity
2 kW
Dehumidification performance
1.2 l/h
Operating temperature
7 °C to 35 °C
Temperature setting range
16 °C to 30 °C
Max. air volume flow
500 m
3
/h
Pressure suction side
1.3 MPa
Pressure outlet side
3.8 MPa
Max. permissible pressure
3.8 MPa
Mains connection
220 V – 240 V / 50 Hz
Nominal current
5 A
Power input (cooling operation)
1 kW
Power input (heating operation)
0.65 kW
Sound pressure level at a
distance of 1 m
48 dB(A)
Refrigerant
R290
Amount of refrigerant
290 g
GWP factor
3
CO
2
equivalent
0.00087 t
Dimensions
(length x width x height)
205 x 995 x 585 mm
Minimum distance to walls and
other objects:
top:
sides:
front:
20 cm
10 cm
10 cm
Weight
38 kg
Remote control battery
Type LR03 / AAA – 1.5 V
Wifi frequency band
2.4 GHz
