Trotec IDX 30 D, Руководство по эксплуатации

Страница: 5 / 22

EN 4 Operating manual – oil heater IDX 30 D
Information about the device
Device description
The directly fired oil heater serves to heat room air for quickly
heating large rooms. The oil heater runs on EL fuel oil, kerosene
or diesel, it must not be used with petrol, heavy fuel oil etc.
It is an oil heater with direct combustion to be installed out of
doors or in rooms with a sufficient fresh air supply.
Functional principle
The device generates warmth by conveying the sucked-in, cold
air past a combustion chamber. Inside the combustion chamber
the fuel is burned. The sucked-in air is heated and fed back to
the environment via the air outlet.
The fuel is conducted from the tank to the injection via a pump.
An ignition contact at the injection ignites the fuel, which is then
burned in a continuous flame.
Device depiction
IDX 30 D
THERMOST
AT CONTROL
ROOM TEMP
.
CLOSE
OPEN
1 2 3
4
5
6
7 8 9 10
12
11
No. Designation
1 upper part of the housing
2 air inlet with protective grid
3 transport handle
4 fan and motor
5 pressure gauge
6 tank
7 frame
8 control panel
9 fuel tank cap
10 wheel
11 tank filling level indication
12 air outlet