EN
3
locating device BI20
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts. Trotec accepts no
liability for damages resulting from improper use. In such a
case, any warranty claims will be voided. Any unauthorised
modifications, alterations or structural changes to the device are
forbidden.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
The device BI20 does not only reliably locate ferrous and non-
ferrous metals and live cables, but also wooden substructures
located under plaster or concrete. These hidden elements,
which are potential interference factors for all work on walls and
floors, are detected by the device to a depth of 50 mm.
Furthermore, the device has an audio-visual warning function,
which is used to signal the detection of live AC cables.
The device comes with an automatic switch-off function.
Device depiction
1
2
3
No.
Designation
1
Display
2
Power /
MODE / CAL
button
3
Battery compartment
