Trotec BD5A, Руководство по эксплуатации

Страница: 6 / 12

5 EN Operating manual – cross line laser BD5A
Operation
Inserting the batteries
Insert the supplied batteries into the device before first use.
Notice
Make sure that the surface of the device is dry and the
device is switched off.
1. Open the cover (4) of the battery compartment.
4
2. If applicable, remove the old batteries.
3. Insert the new batteries in the battery compartment with
correct polarity.
4. Then close the cover of the battery compartment (4) again.
Switching the device on
Warning of laser radiation
Laser class 2, P max.: > 1 mW, λ: 650 nm,
EN 60825-1:2014
Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class 2, observe the
national regulations on wearing eye protection.
The device has 2 different modes of operation. On the one hand,
you can use the device with the automatic self-levelling
function, on the other, it is possible to set the laser to a fix
position.