6
EN
vane anemometer BA06
Setting the air velocity unit
1. Press the
MAX/AVG
button (2) for approx. 2 seconds.
ð
The indication of the velocity unit (11) switches to the
next unit.
2. Repeat this step until the desired unit is indicated on the
display.
Indication of maximum and average values
1. Briefly press the
MAX/AVG
button (2).
ð
The
MAX
indication (8) and the measurement's
maximum value will be displayed.
2. Press the
MAX/AVG
button (2) again to display the average
value.
ð
The
AVG
indication (9) and the measurement's average
value will be displayed.
3. Press the
MAX/AVG
button (2) again to quit using the
function.
Switching the device off
1. Briefly press the power button (7).
ð
The device will be switched off.
ð
The maximum and average values will be deleted.
Maintenance and repair
Battery change
A battery change is required when the battery status
indication (12) lights up or the device can no longer be switched
on (see chapter Inserting the battery).
Cleaning
Clean the device with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Do not use any
sprays, solvents, alcohol-based cleaning agents or abrasive
cleaners, but only clean water to moisten the cloth.
Repair
Do not modify the device or install any spare parts. For repairs
or device testing, contact the manufacturer.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Fault
Cause
Remedy
The device can no
longer be switched
on.
The battery is dead. Insert a new battery
(see chapter
Operation).
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.
