8
EN
DS/DH series
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
During operation, the pump runs fully automatically and the
operating control lamp (3) is illuminated.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Note
When switching the dehumidifier off, wait for approx.
30 minutes. During this time, the residual water flows
of out of dehumidifier's evaporator and to the pump.
After this waiting period, you can shut down the pump.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
If necessary, remove the condensation drain hose and any
residual fluid from it.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The operating light of the pump is not illuminated:
•
Check the power connection.
•
If the device is not starting, have the electrics checked by
a specialist company or by Trotec.
The pump does not operate:
•
Check whether the dehumidifier produces condensate.
The condensate is not discharged correctly (leak):
•
Check all connections and hoses for damages and correct
installation.
•
Check the hoses and connections for dirt and kinks. The
hoses must be clean and without kinks (see chapter
Maintenance).
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.