EN
5
digital alarm clock with room climate control BZ01
Scope of delivery
•
1 x Device
BZ01
•
1 x Battery, type AAA, 1.5 V
•
1 x Quick guide
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
When transporting the device, ensure dry conditions and and
protect the device from external influences e.g. by using a
suitable bag.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
protected from dust and direct sunlight
•
the storage temperature complies with the values specified
in the Technical data
•
Remove the battery from the device.
Operation
Inserting the battery
Prior to first use, insert a battery (type AAA, 1.5 V) into the
device. To do so, please proceed as follows:
1. Open the battery compartment (
12
) at the rear of the
device.
2. Insert the battery with correct polarity (+/-).
12
3. Close the battery compartment.
ð
The display will be activated and an acoustic signal is
emitted.
Switching between the indication of time, alarm time and
calendar year
By pressing the
MODE
button (
7
) you can switch the
indication (
5
) from the time (time mode) to the alarm time (alarm
mode) and then to the indication of the calendar year (date
mode) by pressing the
MODE
button (
7
) once more.
14
15
16
No.
Designation
14
Time mode
15
Alarm mode
16
Date mode
Setting the time and time format
Please proceed as follows to set the time and the time format:
ü
You have selected the time mode (
14
).
1. Press the
SET
button (
8
) for approx. 3 seconds.
ð
The time format (12 hr / 24 hr) flashes on the display.
2. Use the
UP
button (
9
) to set the desired time format.
3. Once the time format has been set correctly, press the
SET
button (
8
) once more to switch to the hour display.
ð
The hour display starts flashing.
4. Use the
UP
button (
9
) to adjust the hour display correctly.
Keep the button pressed to adjust the value at a faster
pace.
5. Once the hour display has been set correctly, press the
SET
button (
8
) once more to switch to the minute display.
ð
The minute display starts flashing.
6. Use the
UP
button (
9
) to adjust the minute display
correctly. Keep the button pressed to adjust the value at a
faster pace.
7. Once the minute display has been set correctly, press the
MODE
button (
7
) to exit the mode.
