EN
9
particle counter PC 200
Example: Setting the measurement duration
1. Use the
keys to select the "Sample Time" menu
and then press "ENTER" to confirm.
ð
The "Sample Time" menu opens.
2. Press the "ENTER" key.
ð
The measurement duration glows blue.
3. Use the
keys to set the measurement duration and
confirm by pressing "ENTER".
ð
The measurement duration not longer glows blue. The
set value is saved.
Carrying out a measurement
1. Slide the protective cap of the temperature sensor (10)
down.
2. Remove the protective cap from the measuring funnel (9).
9
10
3. Press "ENTER" in the start screen.
ð
The "Measurement" screen opens.
4. Press the "RUN/STOP" button.
ð
Depending on the configuration, start delay,
measurement duration and measurement interval are
shown consecutively.
ð
The number of measured particles and their size is
shown.
After each measurement, a measurement log is automatically
created. If you also want to take a photo or record a video,
proceed as described in the next sections.
Carrying out a measurement and taking a photo
1. Press "F1" to start the recording function.
2. Press "F1" again to start the photo function.
ð
The current camera image is shown behind the
measurement data.
3. Press the "RUN/STOP" button.
ð
Depending on the configuration, start delay,
measurement duration and measurement interval are
shown consecutively.
ð
The number of measured particles and their size is
shown.
4. Press "F1" to take a photo of the current display.
ð
The photo is displayed.
ð
The measurement continues in the background.
5. You can save the photo by pressing "F1"
, or delete it
by pressing "F3"
.
Carrying out a measurement and recording a video
1. Press "ENTER" in the start screen.
ð
The "Measurement" screen opens.
2. Press "F1" to start the recording function.
3. Press "F3" to start the video function.
ð
The current camera image is shown behind the
measurement data.
4. Press the "RUN/STOP" button.
ð
Depending on the configuration, start delay,
measurement duration and measurement interval are
shown consecutively.
ð
The number of measured particles and their size is
shown.
5. Press "F2"
again to start recording a video.
ð
The duration of the video is shown at the top of the
screen.
6. Press "F2"
to stop recording the video.
ð
The message "Saving File" appears in the display. The
video is saved.
Inserting a microSD card
The storage capacity of the device can be expanded by using a
microSD card. To insert a microSD card, proceed as follows:
1. Switch the device off.
2. Loosen the screw and open the battery compartment.
3. Remove the battery.
4. Open the cover for the memory card.
