EN
7
fan heater TFC 19 E / TFC 20 E
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
•
Do not position the device directly below a wall socket.
•
Make sure that the device cannot come into contact with
moisture or water.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
•
Avoid open doors and windows.
Control panel
TFC 19 E
3
1
2
No.
Designation
1
Function selector switch for heating levels and oscillation
0
: OFF
I
: heating level 1 (1200 W)
II
: heating level 2 (2000 W)
: heating level 1 and oscillating
: heating level 2 and oscillating
2
Rotary switch room thermostat
3
Operating light
TFC 20 E
1
3
2
No.
Designation
1
Function selector switch for heating levels and oscillation
0
: OFF
I
: heating level 1 (1000 W)
II
: heating level 2 (2000 W)
: heating level 1 and oscillating
: heating level 2 and oscillating
2
Rotary switch room thermostat
3
Operating light
