10
EN
humidifier B 3 E / B 4 E
•
Check the device for leaks.
The water mist has a peculiar smell:
•
The device is new. Remove and rinse the water tank. Let
the open water tank air for some hours.
•
Check the water tank. There may be stale or dirty water in
the water tank. Rinse the water tank and fill it with clear
drinking water.
Condensate forms on the device:
•
The air circulation in the room is insufficient. If necessary,
reduce the nebulizer intensity and provide better air
circulation (e.g. using a fan).
•
The room's humidity level is quite high. This makes it
difficult for the mist to distribute and leads to water
condensing on the device. If necessary, reduce the
nebulizer intensity or switch off the device.
The device is loud or vibrates heavily:
•
Check whether the device is set up in a stable and upright
position.
The device still does not operate correctly after these
checks:
Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.
Table of faults
The following faults can be displayed on the control panel (
6
):
Error
Meaning
The
low water level
LED (
20
)
flashes permanently.
The water level in the water
tank is low.
The
low water level
LED (
20
)
flashes three times in
succession.
The water tank is empty or not
installed correctly. The dry-run
protection has been activated
