6
EN
pedestal fan TVE 24 S
Mounting the rotor
1. Fit the rear part of the protective grid (9) on the motor
spindle (10).
2. Fasten both elements with the retaining ring (11).
10
9
11
Fastening the impeller on the motor spindle
1. Fit the impeller (12) on the motor spindle (10).
2. Fasten the impeller (12) using the impeller retaining
cap (13).
12
13
10
Mounting and closing the protective grid
1. Fit the front part of the protective grid (14) on the rear part
of the protective grid.
2. Make sure that the two parts are fixed by the fastening
clip (15).
3. Use the fastening screw (16) at the bottom of the
protective grid to fasten the two grid parts.
14
15
16
Setting the fan's inclination angle
The inclination angle of the fan can be manually adjusted by up
to 30°.
1. Move the fan head forward or back so that it is slightly
inclined either to the front or to the rear. Make sure that
the fan head locks into place at the desired inclination
angle.
ð
The fan's inclination angle has been set and the air will
flow out at the selected inclination angle.
