1. HANGING SYSTEM INSTALLATION
WARNING: blades should be at least 7 feet from floor
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable
for fan support.
Outlet box must support 35 lbs min.
Note 1:
Note 2:
P3
1A.Installing mounting bracket to ceiling outlet box
1
Install mounting bracket to outlet box in ceiling
by using screws included with the outlet box and
washers from the hardware bag.
2
Loosen the screws at
Mounting Bracket.
Cross Pin
Cotter Pin
1
Canopy
Yoke cover
Assembly
Downrod
1B.
Downrod and Yoke
Installing
Remove cross pin and cotter pin from downrod.
Insert downrod through canopy and yoke cover assembly, and feed motor lead wires through downrod.
Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.
Insert the cross pin through yoke & downrod
and secure with cotter pin.
Tighten both downrod jam screws to further
secure downrod.
Attach wire connectors from yoke cover assembly and from fan together.
1
2
3
4
5
6
1
2
3
D
o
w
n
ro
d
A
s
s
e
m
b
ly
Downrod Jam
Screw(2)
(
Loosen
ing)
Wires
Yoke
Cross Pin
Cotter Pin
4
Yoke
Downrod Jam
Screw(2)
(Tightening)
5
Wire Connectors
from Yoke Cover
Assembly
Wire Connectors
from Fan
6
1C.
Hanging the fan
Lift fan assembly onto mounting bracket.
Mounting Bracket
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
Mounting
Bracket
Ridge
Ball Groove
Fan Assembly
2
(
)
Screw (2)
Loosening
1
Outlet Box
Mounting
Bracket
