Installing the Mobile Router
Tropos Mobile Router Installation Guide
12
5.
Connect a standard Ethernet crossover cable with RJ45 connectors from the CPE port on the
router to the Ethernet port on the client computer (
Figure 12
).
Figure 12 Ethernet Cable Connection
6.
If you plan to use a GPS receiver, mount the receiver according to the instructions shipped
with the receiver. Connect the receiver cable to one of the USB ports on the router.
7.
Use a small flat-head screw driver, if necessary, to remove the screws that attach the 2-pin
power plug to the router.
8.
For vibration security, use the cable tie to secure the RJ45 and USB connectors.
9.
Trim 1/4-inch from the end of the #16AWG wire. Attach the red wire to the + side of the
power plug and the black wire to the - side.
Figure 13 Power Plug Connection
Connection to client
(RJ-45)
Cable tie holder
Power connector
Terminal block
Power wiring
