Installing the Tropos 4210 MetroMesh Router
Tropos 4210 MetroMesh Router Installation Guide
6
Installing the Tropos 4210 MetroMesh Router
Follow these steps to install the Tropos 4210 router:
1.
Remove the router from the shipping box.
2.
Drill four holes with a 7, 8, or 9 drill bit to create 0.203-inch holes in the mounting surface.
Refer to
Figure 4
for the mounting dimensions.
Figure 4 Preparing the Mounting Surface
trp 127
13.1 inches, 33.3 cm
Drill holes for mounting bolts or screws
12.12 inches, 14.66 cm on center
7.91 inches,
20.1 cm
The recommended fastener
is a 1/4"-20 panhead machine screw.
Drill holes
for mounting
bolts or screws,
6.91 inches,
17.55 cm
on center
