KD Table Base Assembly and
Top Attachment Instructions
4011xx
5000xx
7305xx 8001xx
8206xx
Congratulations on the purchase of your Tropitone® furniture.
Read through all steps before starting assembly.
CAUTION:
Do not try to lift or flip components with only
one person. Components may be heavy and awkward to
handle, and may result in injury to persons or damage to
property if not lifted properly.
Use the shipping carton, pool towels or a tarp to prepare a
smooth, non-scratch work surface.
Hardware is screwed into legs and specific table tops.
Tools Required
All Furniture
Safety Glasses
Banchetto Slat
5/32” Hex Key
7/16” Wrench or ratchet
Other Tables
3/16” Hex Key
1/2” Wrench or ratchet
Parts List
(4) Table Legs
(1) Leg Support Brace
(2) on tables 34” height or higher, except Banchetto Slat
(1) Table Top
Acrylic, Glass or Patterned Aluminum Top Assembly
Banchetto Slat Table Top
Cast Aluminum Table Top
Stoneworks® Table Top
(2) Brace Support Arms (69” x 42” or larger Cast dining only)
(1) Center Tube Support (for specific models only)
2
4011xx Banchetto KD Table
STUB MOUNT
Step 1
Place the Leg Support Brace right side up on the prepared work
surface. With the glide (feet) downwards, attach (4) Legs onto the
Leg Support Brace.
Loosely install the bolts, flat washers and nuts
(8 places).
Parts List
See page 1.
Weld should
NOT face up!
Finished
side up!
Don’t fully tighten the bolts
until Step 3.
