Trophy Strike 108487, Руководство по эксплуатации

Страница: 6 / 12

6
Operation
Connection to Battery
Be sure that the switch is in the off position before connecting to a battery.
1. Once the trolling motor is adjusted at a safe operating depth, fully tighten the
transom mounting screws.
2. Ensure the twist grip is on the neutral position “O”.
3. Attach the battery cables to a 12 volt battery. The red wire should attach to the
positive battery terminal (+) and the black cable should attach to the negative
terminal (-).
Battery Type
12V deep cycle or marine battery with at least 50 ampere hour rating. To extend
running time two batteries can be attached wired in tandem. If it is necessary to
extend the battery cable length use 6 gauge AWG wire.
Batteries contain sulphuric acid which can cause severe burns
to eyes, skin and clothing.
Avoid direct contact with the battery or use gloves to handle. The battery
produces hydrogen and oxygen when being charged. Use caution when charging
the battery. Avoid battery contact with open flame or other possible sources of
ignition including electrical devices.
!
WARNING
!
WARNING
Black Cable
to
Negative
Terminal
Red Cable
to
Positive
Terminal
− +
12V DC
Battery