TRONXY XY-2 PRO, Руководство пользователя и инструкция по установке

Страница: 9 / 20

If the machine structure is loose during transportation, it can be
solved by adjusting the eccentric nut.As shown in the figure below
(eccentric nut in red circle), turn the nut with a wrench to adjust the
tightness of the pulley (the pulley should not be adjusted too tight
to avoid smooth operation).
6. Structure debug
Wrench
Left slicer Right slicer Print Head
HeatBed
If the structure is loose in other places, you can tighten the screws
directly.Before debugging, make sure the machine structure is in a
stable and smooth state. You can slide the print head and platform
module by hand to ensure smooth and stable sliding before leveling
printing.
Left
slicer Right
slicer
Print Head
HotBed
7