Tronic TRONIC KH 6900, Руководство по эксплуатации

Страница: 12 / 14

- 8 -
Programming feeding times
1. Make certain that …
• the main switch
on the bottom side
of the automatic pet feeder is set to
ON and
• the time has been set correctly – as
described under "Setting the time".
2. To program the first feeding: Press
the MODE button once.
The following appears in the display :
• 1 for the first feeding to be pro-
grammed
• The time currently set for the first
feeding to be programmed
3. Hold down the SET button until
the indicated time begins to blink.
4. Press the MODE button until the
hour indicator shows the desired
time. Please note that you can only
program feedings on the hour
(e.g. 8 o'clock, 9 o'clock, 10 o'clock, etc.).
5. To confirm the set time, press the SET
button once. The display will
then show:
• 2 for the second feeding to be pro-
grammed
• The time currently set for the sec-
ond feeding to be programmed
➩
Repeat steps 3 to 5 to program
additional feedings. Please note that
a maximum of four feedings can be
programmed. After programming of
the fourth feeding, the current time
is once again shown in the display
.
Programming fewer than four feedings:
First set the time(s) for the desired
feedings. Then confirm the indicated
times for the additional feedings by
pressing the
SET button .
➩
To subsequently change one or more
of the programmed times: Follow
steps 2 to 5 in this section again.
Starting the automatic pet feeder timer
immediately:
Press the START NOW button once. If
you have recorded a voice message, this
will be played once. The bowl with the
food chambers
now turns to the start
position. The bell symbol is shown in the
display
.
KH 6900