Tronic TLG 1000 D6, Руководство по эксплуатации

Страница: 26 / 106

GB│IE
│
23 ■
TLG 1000 D6
Cleaning
DANGER
► Always remove the plug before cleaning the device . There is the risk of an
electric shock! .
► When you are cleaning the device ensure that no moisture gets inside it, so
as to avoid irreparable damage to it .
IMPORTANT
► Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces .
Cleaning the housing
♦ Clean the surfaces of the device with a soft, dry cloth . For stubborn soiling
use a lightly moistened cloth .
♦ Never clean the insides of the charging slots with moist cloths . Instead, use a
clean soft brush to clean them .
♦ If soiled, clean the charging contacts with a dry cloth .
Troubleshooting
In this section you will receive important information for the localisation and
remedying of malfunctions .
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Solution
The battery
charger is not
functioning .
The power cable is not
plugged in .
Insert the power cable into a mains
power socket .
Mains power socket is not
supplying power .
Check the circuit fuse .
The inserted batte-
ries are not being
charged .
The batteries are not inserted
as per their polarity .
Insert the batteries as per their polarity
(see marking in the charging slot) .
The inserted batteries are
not suitable for charging .
Insert exclusively rechargable Ni-Cd
and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batte-
ries .
The temperature monitoring
was initiated .
Disconnect the plug from the mains
power socket and allow the device to
cool down .
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services .