After the printing fails, there may be some residue left in the resin Vat.. To avoid crushing the LCD screen during
leveling, and to prevent it from affecting the printing effect, the resin Vat. needs to be cleaned. Go to
<Clean> in the Settings 2, adjust the exposure time according to the residue situation (such as quantity,
particle size, distribution, etc.), click <Next> to expose, and remove all the residues as much as possible
into a film.
F.A.Q.
Select the <WIFI> in Settings 1, find the available LAN in the available network and enter the password, the
printer will automatically obtain an IP address and display it on the touch screen, the user can log in to the IP
address through the computer browser for transmission (note that : Make sure that the computer and the 3D
printer are in the same WiFi environment)
How to transfer model files over WiFi connection?
How to clean the resin Vat.?
13
192.168.132.241
Written 57550 bytes
Upload files
Select the file No files selected
Submit
Upload files
Select the file Tower.zip
Submit
Submit
Upload files
TronHoo
