TRONFY GP80 PROJECTOR
9
1. Find the best location for the screen.
2. Consider your screen height.
3. Know your screen size.
Part 2 of 3: Think about the Projector Placement
1. Calculate your projector’s throw distance.
2. Determine the best throw distance for your projector.
3. Find out your projector’s vertical offset.
4. Calculate the vertical placement of your projector.
5. Determine horizontal lens shift.
Part 3 of 3: Mounting the Projector
1. Decide on the best mount to suit your projector and room.
2. Attach the mount.
3. Calculate the mount-to-lens distance and adjust throw distance accordingly.
4. Secure the projector.
5. Secure the cables.
6. Adjust the projector settings to fine tune the image.
When you complete all the steps, you can enjoy your Home theater life.
Notice:
When you use it, you should adjust the image 180 degrees flip first.
Trouble Shooting
How to reduce the noise of projector
：
Usually, when the projectors works, the fan will make noise when cooling off the high
temperature. Please take a break after 3-4 hours of using to avoid overheating.
Besides, here are the tips to reduce the noise
1. Please use the projector in room temperature or low temperature, so the projector will heat
slowly, and then the noise will be reduced.
2. Please use projector in the clean environment and seal it after using to get away from the dust.
3. If you use the projector about 3-6 months, the noise of projector will be louder, you can try to
take apart it to clean the dust on the fan.
Over Temperature Protection:
If the temperature inside the projector rises too high, the over temperature projector will
automatically turn off the lamp with the STATUS indicator blinking.
Should this happen, do the following:
* Unplug the power cable after the cooling fans stop.
* Clean the ventilation holes if they are clogged with dust.
* Wait about 60 minutes until the inside of the projector becomes cool enough.