TRONE Neodoro NETBCERN-12.WH, Инструкция по эксплуатации

Страница: 29 / 32

Self-Cleaning Nozzle Maintenance
•
Rotate the knob upwards to the back wash setting and
hold it in the upwards position for approximately 2-3
seconds. The spray wand will then extend.
•
Wash the cleaning tube and nozzle with a toothbrush
coated with toothpaste.
•
Do not use excessive force. Press the Stop [ ] button
to take the nozzle tube back once you’re done cleaning.
Cleaning the Junction Block
•
The junction block is installed on the water supply angle
valve. It cannot be pressed between the wall and the
toilet, not any other foreign object, and must be away from
any corrosive substances.
•
The junction block should be installed away from heat
sources such as heaters, high temperature lights, etc. It
should be installed indoors and should not be exposed to
sunny or cold weather.
•
Please replace the junction block after it has reached the
end of its service life.
•
If you are not at home for a long time (due to travel, etc.),
please turn off the water supply angle valve.
•
It is recommended to change the filter every 6 months.